Any environment where UV lamps are in operation should be extremely conscious of health and safety. Improper use of UV lamps could result in severe bodily harm, including burns and damage to eyesight. As responsible manufacturers of UV lamps, we are proactive in discussing health and safety in relation to UV. With adequate consideration and procedures, the risks from UV can be neutralized. 

Below is some guidance about how to use UV safely. Please also see the downloadable information located on this page for our safety guide. Please don't hesitate to get in touch for further support regarding UV lamp safety. Contact our technical team on +44 (0)1582 805410 or email info@uv-technik.co.uk.

Key Points:

• The operation of UV lamps should be carried out only by trained staff
• The installation of UV lamps should be carried out only by trained staff
• Any connection, testing or measuring activities pertaining to electrical parts must be carried out by qualified electricians
• Keep all UV lamp packaging away from children as there is a choking risk
• Ensure any UV lamp is installed correctly according to the installation guide provided with your machinery
• Wear adequate PPE (person protective equipment) when working with UV
• Keep moisture away from any live parts in your UV system
• Do not look directly into UV light

Ozone

Ozone is produced during the operation of UV curing lamps. Ozone concentrations of higher than 0.1 ppm can cause damage to lungs. High concentrations above 0.2 ppm will result in chest pains and headaches. Ozone should be measured at workstations that are using UV lamps. Please see our downloadable datasheet regarding the management of ozone.

UV Safety Products

Please see here for our UV safety product range.